Corporate Environments

Engage directly with hearing aid users through selecting the right hearing loop systems for your space
Enhance communication clarity and boost overall meeting efficiency
Ensure meetings are compliant with accessibility regulations

While hearing aids perform well in one-on-one conversations, challenges often arise in larger or noisier environments. In spaces like meeting rooms, conference halls, or training facilities, background noise and distance from the speaker can hinder clarity.

A selection of some of our most popular and recommended hearing loops for the corporate environment can be found below. This includes both portable and fixed hearing loop systems.

Roger On 3 Unlimited Microphone

Ideal for: Small Meeting Rooms (up to 10 people) & presenting to larger groups

Fully portable system: can be used for multiple rooms
Versatile: 4 main ways of use – On a table; Pointing; Presenter; TV/Multimedia
Easy to use and set up
Over 6 hours operating time
Discreet Secure Communication: loop the person not the room
No installation required
Simultaneous Use in Adjacent Rooms Without Interference

The Roger On 3 System is recommended for use in meeting rooms or areas where discussions are taking place with up to 10-12 people – more depending on how the meetings are conducted. It can also be used in larger areas where there is just one person presenting or speaking and others are in “audience” and is the most versatile of microphones in the Phonak range.

How does it work?

The Roger On wireless microphone transmits the sound via radio frequency from the wireless microphone to neckloops worn by those who are hard of hearing. In turn the neckloop receiver will connect to the users hearing aid using the T-setting, or a set of headphones. Only people wearing the neckloop will be able to access the hearing loop but an unlimited number of neckloops can be paired with the microphone.

4 main ways of use

The microphone can be hung around the neck by a lanyard (presenter mode), placed on a surface (table mode) for use during meetings, pointed at the person talking if discussions are taking place or can connect to a PA System, TV or laptop. It will also automatically switch modes depending on how it is being used.

Over 6 hours operating time

The Roger On Microphone has a battery life of over 6 hours when used with a Roger Neckloop Receiver. The receivers themselves having a battery life of over 10 hours.

read less

Roger Table Mic 3 Unlimited Microphone (twin pack)

Roger Table Mic II x2 with remote control

Ideal for: Large Meeting Rooms (10+ people)

Fully portable system: can be used for multiple rooms
Remote control operated: for muting and adjusting pick-up range
Twin packs available to cover larger rooms or U-Shaped Tables
Connect to multimedia devices: 3.5mm jack connection
Over 16 hours operating time
Discreet Secure Communication: loop the person not the room
No installation required
Simultaneous Use in Adjacent Rooms Without Interference

For larger meeting rooms, we would recommend the Roger TableMic 3. This is a wireless microphone designed specifically for meetings that is placed centrally on the table. It has a typical range of up to 20 meters so would easily cover a large meeting room, however twin packs are available for use in larger conference suites or boardroom and training situations and would be ideal for a U shaped table set-up. Rule of thumb being that each person should be a maximum of 3 meters from the mic itself to ensure audio pick up.

It is a great solution for all types of meetings including noisy situations, with multiple speakers and sound coming from many directions.

How does it work?

The Roger Table Mic transmits the sound via radio frequency from the wireless microphone to neckloops worn by those who are hard of hearing. In turn the neckloop receiver will connect to the users hearing aid via the T setting, and only people wearing the neckloop will be able to access the hearing loop. The neckloop can also be used with a set of headphones for those that are hard of hearing but don’t wear hearing aids.

Useful features

The included remote control allows you to mute individual microphones, useful when one person is presenting or speaking to a larger group. There is also a 3.5mm audio input for connection to multimedia devices such as smart screens, TV’s and video conferencing.

Over 16 hours operating time

The Roger TableMic 3 has a battery life of over 16 hours and the receivers have a battery life of over 10 hours.

read less

Roger Training Room Portable Hearing Loop System

Ideal for: 1 presenter, multi-media audio and audience participation

Fully portable: can be used wherever your training needs take you
Complete System: Allows for media audio and audience participation in addition to the presenters voice
Can be used for small group break-out discussions
Quick and easy to set-up
Robust carry and storage case
Discreet Secure Communication: loop the person not the room
No installation required

The Roger Training Room system includes a Roger Touchscreen Mic 3, a Multimedia Hub, a pass around microphone for audience participation and neckloop receivers.

A complete system

The Touchscreen Microphone is worn by the meeting chair or trainer as a directional microphone. This means it will focus in on the audio from them as opposed to any other audio in the room, filtering out background noise. It can also be used as an omnidirectional microphone for small group discussions/meetings by placing it on a table. The multimedia Hub is used to stream audio from any media device using a 3.5mm headphone jack connection. Media audio can be spoken over using the touchscreen microphone if required.

Audience participation

The pass around microphone also connects with the touchscreen mic and can be passed around the audience. Ideal when audience participation is needed for questions and answers or for an additional presenter to use in another part of the room.

How does it work?

The Roger Touchscreen Mic, Multimedia Hub and the pass around mics form a network and transmit the sound via radio frequency to neckloop receivers worn by those who are hard of hearing. In turn the neckloop receiver will connect to the users hearing aid via the T setting, and only people wearing the neckloop will be able to access the hearing loop. The neckloop can also be used with a set of headphones for those that are hard of hearing but don’t wear hearing aids.

read less

Roger BaseStation Transmitter

Ideal for: Audio from a PA/AV System

Designed to broadcast audio from a sound system
Simultaneous Use in Adjacent Rooms Without Interference
Discreet Secure Communication: loop the person not the room
Mains powered: Standard 3 pin plug
Long transmission range: Up to 40 plus meters
Rack and wall mount included
Perfect for large event & meeting spaces where it is not practical to install a fixed hearing loop

The Phonak Roger BaseStation Transmitter is designed to broadcast audio from a sound system via a 6.5mm Jack or XLR connection. It is a small mains powered device that delivers high quality sound signals via radio frequency to the Roger Neckloop Universal receivers worn by those who are hard of hearing.

The hearing or “induction’ loop is created by the loop around the neck. This creates an electromagnetic field which would be picked up by the receiver in the hearing aid. The hearing aid then converts this back into speech sound for the user to hear.

Neckloop receiver

The neckloop is discreet, lightweight, easy to use and is accessible to any hearing aid with a Tcoil. It can even be tucked under clothing if desired and used with a set of headphones should someone be hard of hearing but not wear hearing aids.

Basestation transmitter

The Base station transmitter has a range of up to 40m which can be increased with the use of repeaters if necessary.

Being a portable system there is no cost of installation to consider, and it can be easily moved and used elsewhere as and when required.

read less

Shop our full range of Portable Hearing Loops

PDA103R Small Room Hearing Loop System 50m2

Ideal for: Small Meeting Rooms (up to 50 square meters)

Fixed small room system: creates a perimeter loop up to 50sqm (approx. 7m x 7m)
Complete System: Includes everything you need
Easy to install: wall mounted
Mains powered: Standard 3 pin plug
Ceiling mounted microphone: provides up to 25m2 ambient coverage
Additional audio inputs available: via the outreach extension system

The PDA103R is a small room hearing loop that includes everything you will need for the system, including amplifier, microphone and loop cable. Perfect for small meeting rooms where hearing loops are not required in adjacent rooms or spaces.

Loop Cable

Either end of the loop cable connects to the amplifier and should be run around the perimeter of the room either at skirting level/under carpet tiles or ceiling height/in floating ceiling, but within the range of 2-3 meters off ground, no higher.

Microphone

The APM microphone is fitted above the meeting room table, no higher than 3m, and connects to the amplifier using the supplied belden audio cable. As the PDA103R is powered using a standard 3 pin kettle plug, no specialist installation by an electrician is necessarily required.

How does it work?

Audio is picked up by the microphone and is sent around the loop cable. The loop then cable creates an electromagnetic field which would be picked up by the receiver in the hearing aid and converted back into speech sound for them to hear. Anyone wearing a hearing aid with the T-coil setting could connect to the hearing loop.

Additional Audio Inputs

The system can be expanded to also take audio input from a TV, Laptop or other media device using a compatible outreach plate (not supplied).

read less

AKM1 Meeting/Seminar Room Hearing Loop Kit 200m2

Ideal for: Medium to Large Meeting Rooms (up to 200 square meters)

Fixed medium to large room system: creates a perimeter loop up to 200sqm (approx. 14m x 14m)
Complete System: Includes everything you need with the exception of loop cable
Mains powered: Fused spur required
Ceiling mounted microphone: provides up to 25m2 ambient coverage
Additional audio inputs available: via the outreach extension system

The AKM1 Meeting/Seminar Room Hearing Loop Kit is ideal for a meeting room up to 200m2 and includes everything you would need to install the system, with the exception of the loop cable. This includes a PDA200E induction loop amplifier, an APM omni-directional plated microphone, 9m Belden cable (to connect the Microphone to the amplifier) and a Loop Fitted sticker so that anyone using the room is aware that they can connect to a hearing loop. Perfect for medium to large meeting rooms where hearing loops are not required in adjacent rooms or spaces.

The PDA200E amplifier included with the AKM1 kit would require electrical installation by a qualified electrician as a fused spur is required, however the rest of the install (ie. Laying loop cable etc) could be done in house if preferred.

Loop Cable

Microphone

The APM microphone is fitted above the meeting room table, no higher than 3m, and connects to the amplifier using the supplied belden audio cable. For even coverage throughout a room that is multifunctional, additional APM’s may be required.

How does it work?

Additional Audio Inputs

The system can be expanded to also take audio input from a TV, Laptop or other media device using a compatible outreach plate (not supplied).

read less

AKM3 Professional Meeting/Seminar Room Hearing Loop Kit 200m2

The AKM3 Professional Meeting/Seminar Room Hearing Loop Kit - amplifier front view with microphone

Ideal for: Medium to Large Hall or Seminar Room (up to 200 square meters)

Fixed medium to large room system: creates a perimeter loop up to 200sqm (approx. 14m x 14m)
Complete System: Includes everything you need with the exception of loop cable
Mains powered: Fused spur required
Ceiling mounted Pro45 microphone: exceptional audio coverage from a targeted area of the room
Additional audio inputs available: via the outreach extension system

The AKM3 Professional Meeting/Seminar Room Hearing Loop Kit is ideal for a meeting room or Hall up to 200m2 and includes everything you would need to install the system, with the exception of loop cable. This includes a PDA200E induction loop amplifier, a Pro45 omni-directional microphone, 9m Belden cable and outreach plate (to connect the Microphone to the amplifier) and a Loop Fitted sticker so that anyone using the room is aware that they can connect to a hearing loop. Perfect for medium to large meeting rooms where hearing loops are not required in adjacent rooms or spaces.

The PDA200E amplifier included with the AKM3 kit would require electrical installation by a qualified electrician as a fused spur is required, however the rest of the install (ie. Laying loop cable etc) could be done in house if preferred.

Loop Cable

Microphone

The Pro45 microphone supplied is usually fitted either in the centre of the room or above the stage if that is where most audio will come from, but no higher than 3m. Options are available if your ceiling is higher than this or if you require a different type of mic such as handheld or roaming wireless microphone.