Description
The AKL1 Lecture Room Hearing Loop Kit is ideal for creating a high quality induction loop system for a Lecture room up to 200m2 and includes everything you would need to install the system*.
*With the exception of loop cable selectable as a separate item.
The AKL1 Lecture Room Hearing Loop Kit includes a PDA200E induction loop amplifier, AMT tie/desk microphone, AML lectern microphone and 2 x APJ 3.5mm jack input plates, and 2 x 6m Belden cable. It also includes a “Loop Fitted” sticker so that anyone using the room is aware that they can connect to a hearing loop.
How does it work?
The loop cable connects to the amplifier and should be run around the perimeter of the room. This is required at either at skirting level (or under carpet tiles) or ceiling ( in floating ceiling), but normally within the range of 2-3 meters off ground, no higher.
The tie clip and Lectern microphones supplied are connected to the amplifier via the jack input plates using the belden audio cable. One or both of these can be used and should be positioned where ever they are required.
The loop amplifier transforms the audio signal into an electric current in a loop cable surrounding the listening area. Subsequently, the loop current sets up a magnetic field which fluctuates with the audio. When the hearing aid is switched on to the T-setting, the T-coil will pick up the signal from the magnetic field and convert it back into audible sound. This means sound is clear and crisp and tailored for the individual’s hearing loss.
Anyone wearing a hearing aid with the T-coil setting could connect to the hearing loop.
Reviews
There are no reviews yet.