The APXM XLR 3 Pin Microphone Outreach Plate connects balanced or unbalanced microphones with standard 3 pin XLR connectors such as the AMP Handheld Microphone.
- Accepts balanced or unbalanced microphones with standard 3 pin XLR connectors.
- Part of C-TEC’s patented ‘Outreach Plate’ audio input extension system.
- Compatible with C-TEC’s entire range of amplifiers – PDA102, 200E, Pro-Range and ML1 Hearing loop amplifiers.
- Can be connected to any third-party audio or induction loop amplifier using an APV 24V 250mA power supply.
- Mounts on a 25mm standard UK single gang back box.
|Power requirements||Supply volts: 12-32V regulated d.c.; Supply current: 12-15mA.|
|Controls||Adjust input level.|
|Input signal level||-50dBv (5mV mic)|
|Level control||0dB to -46dB|
|Phantom volts||8V/0V (link selectable)|
|Signal to noise ratio||Greater than 75dB|
|THD + noise||Less than 0.02%|
|Product dimensions (mm)||W 85 x H 85 x 15 D mm. Mount on a standard 25mm single gang UK back box.|
|Construction & finish||Plastic.|
|Operating conditions/temperature||-5ºC to +40ºC. Max relative humidity: 95%.|
The Outreach Plate audio input extension system comprises a range of wall, ceiling and desk mountable plates specifically designed to increase the audio input capability of any audio system. Covering the most common variants of audio connectors, they work by mixing the signals from various audio input sources into a single balanced line level input on a compatible amplifier.
Each input plate features a built-in mixer, preamp, input level control and balanced output.
Typically, up to 10 Outreach plates (any mix) can be daisy-chained to one balanced line level connection. Cable lengths up to 100m are easily achievable using standard two-pair audio cable (i.e. Belden 8723).
Each plate requires four wires; two balanced line (Line/A +, Line/A –), one ground (GND) and one power connection (V+ = 12-32V d.c.).
Most of C-TEC’s PDA Range induction loop amplifiers are fitted with an Outreach connection socket as standard. For audio systems that do not have an Outreach socket, straightforward network connection can be achieved using an ‘APV’ 24V 250mA d.c. regulated power supply and an ‘APXO’ 3 pin XLR balanced line output plate.